FUTABA 12Z Series Instruction Manual page 58

SERVO-REVERSE
Servo Reverse changes the direction of an
individual servo's response to a control stick
movement.
For CCPM helicopters, be sure to read the
section on Swash AFR before reversing any servos.
With CCPM helicopters, always complete your
servo reversing prior to any other programming.
If you use pre-built Airplane/Sailplane functions
[Return Key]
Servo reversing procedure
*After linkage of a new model is complete, check whether or
not each servo is connected to the correct channel.
*Next, determine whether you need to reverse any channels
by moving each stick.
*The display blinks.
*Repeat the operation above for each channel that must be
reversed.
58 <Functions of Linkage Menu>
(The display screen is an example. The screen depends on the model type.)
that control multiple servos, it may be confusing
to tell whether the servo needs to be reversed or a
setting in the function needs to be reversed. See the
instructions for each specialized function for further
details. Always check servo direction prior to every
model memory, hook ups, and radio function.
PUSH
[Cursor Lever]
[Data Input Dial]
[Enter Button]