FUTABA 12Z Series Instruction Manual page 25

Home screen
Use the cursor lever to select the following display area to call each setting screen, and push the enter
button. The setting screen appears.
Airplane/Glider/EP Glider Home Screen
Model Name
• The model name that is currently used is
displayed here.
• Push the enter button to call the Model
Select screen.
User's name
• Push the enter button
to call the User's Name
Setting screen.
Digital trim (T1 to T4, CD)
• Trim position is displayed
here.
Push the enter button
to call the Dial Monitor
screen.
Timer
• Timer is displayed here.
Push the enter button to
start/stop the timer.
• Time and mode (UP/DN)
are displayed here.
Push the enter button for
resetting the timer.
• Push the enter button
to call the timer setting
screen.
• This shows the accumulated time since
the latest reset.
(Hour):(Minute):(Second)
Push the enter button to call the system
timer setting screen.
Modulation mode/Frequency
• Modulation mode is displayed
here. (PCM-G3/PC
PPM)
• Band number and frequency
are displayed here.
• Push the enter button to call the
Frequency Set screen.
Warning
your aircraft.
Check the remaining battery as often as possible
and try to charge the battery earlier. If the battery
alarm makes a sound and its warning symbol is
displayed, land your aircraft immediately.
*You can adjust the LCD contrast by the display setting in the
system menu.
System timer
Battery Indicator
• When the remaining battery
reaches 19%, the alarm will
b e e p . L a n d y o u r a i r c r a f t
immediately.
(Menu)
• System
• Linkage
• Model
Push the enter
b u t t o n t o c a l l
e a c h M e n u
screen.
Condition
• T h e c o n d i t i o n
n a m e t h a t i s
currently used is
displayed here.
Push the enter
b u t t o n t o c a l l
M1024/
t h e C o n d i t i o n
Select screen.
<Basic Operation> 25