FUTABA 12Z Series Instruction Manual page 43

Receiver and servo connection
Connect the receiver and servos in accordance with the connection diagram shown below. Always read
[Precautions when mounting the receiver and servos] of [Before using]. When mounting the receiver and
servos to the fuselage, connect the necessary points in accordance with the kit instruction manual.
Receiver and servos connection diagram
~
~
Ni-Cd battery
Receiver switch
Charging port/
Servos
DSC connector
The Servo connection by model type tables are shown on the following pages. Connect the
servos to match the fuselage used.
<Model Basic Setting Procedure> 43