Accessories - FUTABA FMT-03 Instruction Manual

The following additional accessories are available from your dealer. Refer to a Futaba catalog for
more information:
• FT2F2100BV2 transmitter battery pack - the (2,100mAh) transmitter LiFe battery pack may be easily
exchanged with a fresh one to provide enough capacity for extended flying sessions.
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note: FMT-03 is connected by an exclusive trainer code
by FMT-03 fellow. It isn't possible to connect with a transmitter of the different model.
• Servos - FMR-03 can use only futaba S.BUS2 servos.
• Telemetry sensor - please purchase an optional sensor, in order to utilize bidirectional communication
system and to acquire the information from a model high up in the sky.
[ Temperature sensor : SBS-01T/TE] [Altitude sensor : SBS-01A] [RPM sensor magnet type : SBS-
01RM][RPM sensor optical type : SBS-01RO] [RPM sensor brushless motor type : SBS-01RO] [GPS
sensor : SBS-01G] [Voltage sensor : SBS-01V] [S.BUS servo sensor : SBS-01S] [Current sensor : SBS-
01C]
• Y-harnesses, servo extensions, hub,etc - Genuine Futaba extensions and Y-harnesses, including a heavy-
duty version with heavier wire, are available to aid in your larger model and other installations.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
FASSTest types are available.)
<Before Use> 13