Accessories - FUTABA T16SZ Instruction Manual

Accessories

Optional Parts
• HT5F1800B transmitter battery pack - the (1,800mAh) transmitter NiMH battery pack may be easily
exchanged with a fresh one to provide enough capacity for extended flying sessions.
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note that the T16SZ transmitter may be connected to
another T16SZ system, as well as to any other models of Futaba transmitters. The T16SZ transmitter uses
one of the three cord plug types according to the transmitter connected. (Refer to the description at the
TRAINER function instructions). The part number of this cord is: FUTM4405.
• Servos - there are various kinds of servos. Please choose the Futaba servos that best suit your model and
purpose. If you utilize an S.BUS system, you should choose a S.BUS servo. An analog servo cannot be
used if "FASSTest12CH mode" is used.
• Telemetry sensor - please purchase an optional sensor, in order to utilize bidirectional communication
system and to acquire the information from a model high up in the sky.
[ Temperature sensor : SBS-01T/TE] [Altitude sensor : SBS-01/02A] [RPM sensor magnet type : SBS-
01RM] [RPM sensor optical type : SBS-01RO] [RPM sensor brushless motor type : SBS-01RB] [GPS
sensor : SBS-01/02G] [Voltage sensor : SBS-01V] [S.BUS servo sensor : SBS-01S] [Current sensor :
SBS-01C]
• Neckstrap - a neckstrap may be connected to your T16SZ system to make it easier to handle and improve
your flying precision since your hands won't need to support the transmitter's weight.
• Y-harnesses, servo extensions, hub,etc - Genuine Futaba extensions and Y-harnesses, including a heavy-
duty version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros is available for your aircraft or helicopter needs.
• Governor - for helicopter use. Automatically adjusts throttle servo position to maintain a constant head
speed regardless of blade pitch, load, weather, etc.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
FASSTest and FASST, T-FHSS, S-FHSS types are available.)
• SBD-2, S.BUS decoder -The SBD-2 is a converter for using conventional servos (other than an S.BUS
servo) with the S.BUS/S.BUS2 system. The SBD-2 connects to the receiver output of a S.BUS/S.BUS2
system and eight servos can be used. SBD-2 can change the output CH by selecting from 9 groups using
a rotary switch. SBD-2 can use EXT battery (for servos).
The following additional accessories are available from your dealer.
Refer to a Futaba catalog for more information:
13
＜ Before Use ＞