FUTABA 12Z Series Instruction Manual page 91

CAMBERFLP to ELE
This mixing is used to correct changes (elevator
by the linkage, adjustments can be made by
changing the mixing rate polarity (+ or –).
call the setup screen shown below by pushing the
enter button.
[Return Key]
switching
(For more information,
refer to the description at
the back of this manual.)
adjustment
Setting method
data input dial to the left and push the enter
(For a description of the switch selection method,
see the description at the back of this manual.
right item and adjust the mixing rate with the data
input dial.
*For a description of the curve setting method, see the
description at the back of this manual.
turn the
FLP 1
(Camber Flap)
(Camber Flap)
V-TAIL AILVATOR
ELEVATOR
ELEVATOR
ELEVATOR 2
(Currently selected condition name)
PUSH
* T h e d i s p l a y s c r e e n i s a n
example. The actual screen
depends on the model type.
*When the mixing direction is reversed by the linkage,
adjustments can be made by changing the mixing rate
polarity (+ or –).
(For a description of the curve setting method, see
the description at the back of this manual.)
<Model Menu (Airplane/Glider Functions)>
FLP 2
ELEVATOR 2
[Cursor Lever]
[Data Input Dial]
[Enter Button]
91