Flap Setting - FUTABA 12Z Series Instruction Manual

FLAP SETTING

independently at each servo according to the wing
type.
offset
The camber flaps of a 4-flap model can be
FLP)
and call the setup screen shown below
by pushing the enter button.
[Return Key]
side adjustment
reference point
offset
Setting method
item according to the wing type and adjust the
travel independently.
reference point.
turn the data input dial to the left and push
the enter button
.
FLP 4
FLP 3
(Brake Flap) (Brake Flap)
FLP 1
FLP 2
(Camber Flap)
(Camber Flap)
*The display screen is an example. The actual
screen depends on the model type.
PUSH
switching
(For more information, refer to
the description at the back of
this manual.)
move the cursor to
(For a description of the switch selection method,
see the description at the back of this manual.)
<Model Menu (Airplane/Glider Functions)>
[Cursor Lever]
[Data Input Dial]
[Enter Button]
the
81