AIRBRAKE to ELE
This mix is used when you want to mix the
elevators with airbrake (spoiler) operation. It
raises the elevators to correct for dropping of the
nose during airbrake operation.
*This function does not operate when airbrake is not assigned
at the Function menu in the Linkage Menu.
elevator servos can be adjusted.
call the setup screen shown below by pushing the
enter button.
[Return Key]
switching
(For more information,
refer to the description at
the back of this manual.)
each elevator
servo
ELEVATOR
*For a description of the curve setting method, see the
description at the back of this manual.
AILVATOR
V-TAIL
ELEVATOR
ELEVATOR 2
*The display screen is an example. The actual
screen depends on the model type.
(Currently selected condition name)
PUSH
<Model Menu (Airplane/Glider Functions)>
AIRBRAKE
ELEVATOR 2
[Cursor Lever]
[Data Input Dial]
[Enter Button]
85