Table of Contents
Advertisement
Table 39 Network > Wireless LAN > WPS
LABEL
WPS Status
Release_Co
nfiguration
Apply
Refresh
8.5 The WPS Station Screen
Use this screen to set up a WPS wireless network using either Push Button
Configuration (PBC) or PIN Configuration.
Click Network > Wireless LAN > WPS Station. The following screen displays.
Figure 56 Network > Wireless LAN > WPS Station
P-660HN-F1A User's Guide
DESCRIPTION
This displays Configured when the P-660HN-F1A has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Unconfigured if WPS is disabled and there is no wireless
or wireless security changes on the P-660HN-F1A or you click
Release_Configuration to remove the configured wireless and
wireless security settings.
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the P-660HN-F1A.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 8 Wireless LAN
157
Advertisement
Table of Contents
