Configuring The Lan Ip Alias Screen; The Upnp Screen - ZyXEL Communications AMG1312-T Series User Manual

When you use IP alias, you can also configure firewall rules to control access to the LAN's logical
network (subnet).

8.4.1 Configuring the LAN IP Alias Screen

Use this screen to change your AMG1312-T Series's IP alias settings. Click Network Setting >
Home Networking > IP Alias to open the following screen.
Figure 51 Network Setting > Home Networking > IP Alias
The following table describes the labels in this screen.
Table 34 Network Setting > Home Networking > IP Alias
LABEL
IP Alias
IP Address
IP Subnet Mask
Apply
Cancel

8.5 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 116
Use the following screen to enable or disable the UPnP function on your AMG1312-T Series. Click
Network Setting > Home Networking > UPnP to display the screen shown next.
Figure 52 Network Setting > Home Networking > UPnP
AMG1312-T Series User's Guide
DESCRIPTION
Select Enable to configure a LAN network for the AMG1312-T Series.
Enter the IP address of your AMG1312-T Series in dotted decimal notation.
Your AMG1312-T Series will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the AMG1312-T Series.
Click this to save your changes.
Click this to restore your previously saved settings.
for more information on UPnP.
Chapter 8 Home Networking
121