Table of Contents
Advertisement
Table 11 Menus: Router Mode (continued)
LINK
WAN
LAN
DHCP
Server
NAT
DDNS
Security
Firewall
Content
Filter
Management
Remote
MGMT
UPnP
Bandwidth
MGMT
Maintenance
System
Logs
Tools
Sys OP
Mode
Language
4.3 Setting your NBG-418N v2 to AP Mode
Connect your computer to the LAN port of the NBG-418N v2.
1
Chapter 4 Modes
TAB
FUNCTION
Internet
This screen allows you to configure ISP parameters, WAN IP address
Connection
assignment, DNS servers and the WAN MAC address.
Advanced
Use this screen to configure multicast WAN and auto IP setup.
IPv6
Use this screen to set the IPv6 WAN connection type.
IP
Use this screen to configure LAN IP address and subnet mask.
General
Use this screen to enable the NBG-418N v2's DHCP server.
Advanced
Use this screen to assign IP addresses to specific individual computers
based on their MAC addresses and to have DNS servers assigned by the
DHCP server.
Client List
Use this screen to view current DHCP client information and to always
assign an IP address to a MAC address (and host name).
General
Use this screen to enable NAT.
Application
Use this screen to configure servers behind the NBG-418N v2.
Port Triggering
Use this screen to configure port triggering settings on the NBG-418N v2.
General
Use this screen to configure Dynamic DNS, a service that allows you to
map a fixed domain name to a non-fixed IP address.
General
Use this screen to activate/deactivate the firewall.
Services
Use this screen to enable or disable ICMP and VPN passthrough features.
Filter
Use this screen to configure content filter settings on the NBG-418N v2.
WWW
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG-418N v2.
General
Use this screen to enable UPnP on the NBG-418N v2.
General
Use this screen to configure bandwidth management settings on the NBG-
418N v2.
General
Use this screen to view and change administrative settings such as system
and domain names, password and inactivity timer.
Time Setting
Use this screen to change your NBG-418N v2's time and date.
View Log
Use this screen to view the logs for the categories that you selected.
Firmware
Use this screen to upload firmware to your NBG-418N v2.
Configuration
Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N v2.
Restart
This screen allows you to reboot the NBG-418N v2 without turning the
power off.
General
This screen allows you to select the device operation mode.
Language
This screen allows you to select the language you prefer.
NBG-418N v2 User's Guide
36
Advertisement
Table of Contents
