Configuring An Access Profile In General Control Mode - ZyXEL Communications P-334U User Manual

P-334U/P-335U User's Guide
Table 55 Settings: Parental Control Screen
LABEL
Parents Override
Password
Confirmed Password
Control Mode
Edit Category
User Idle Timeout
Restrictions Exception
Schedule
#
Day
From
To
Modify
User List
#
Active
Name
Profile
Modify
Apply
Reset

13.4.5 Configuring an Access Profile in General Control Mode

An access profile is a list of pre-selected categories to block. To configure Parental Control in
General mode:
1 Start the ZyXEL Device web configurator, click Security > TMSS, and then click the
Parental Control tab. The Parental Control screen appears.
2 In the Control Mode list box, select Use General Control.
160
DESCRIPTION
This password allows users to bypass Parental Control. Enter a password
between four and 32 printable characters. Spaces are not allowed.
To change the override password, type the new password in the Parents
Override Password field, retype it in the Confirmed Password field, and
then click Apply.
This allows you to select either general control or per-user control mode.
If you select general control mode, click this button to configure the access
profile that will apply to all users.
Select a timeout setting when you use per-user control mode. If a computer
is idle for the selected interval, the user is automatically logged out of
Parental Controls. If a user leaves a computer unattended, this feature
prevents someone else from using the computer to gain access to
restricted sites.
The following table is a list of days and times when restrictions are not
enforced. It displays in the Parental Control screen when you use general
control mode.
This is the number of the schedule.
This is the day(s) when parent control is deactivated.
This is the start time when you want to disable parental control.
This is the end time when you want to disable parental control.
Click the Edit icon to go to the screen where you can edit the schedule.
Click the Remove icon to delete an existing schedule.
The User List is available only when you select per-user control mode. It
shows each user's name and access profile. Active users (green light bulb)
can access the websites permitted by their access profiles. Inactive users
(gray light bulb) cannot log in and cannot access the Internet.
This is the number of the user.
This displays whether the user is active or inactive.
This is the name of the user.
This is the access profile applied to the user.
Click the Edit icon to go to the screen where you can configure the user
information, access profile and schedule.
Click the Remove icon to delete an existing user.
Click Apply to save the settings.
Click Reset to begin configuring this screen afresh.
Chapter 13 Trend Micro Home Network Security (TMSS)