Remote Access - ZyXEL Communications NBG7815 User Manual

13.5 Remote Access

Use this screen to change your NBG7815's remote management settings. You can use HTTPS or Wake on
LAN to access and manage the NBG7815.
Wake On LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature, the remote hardware (such as the network adapter
on a computer) must support Wake On LAN using the "Magic Packet" method.
You need to know the MAC address of the remote client to use this feature. It may be on a label on the
device.
Click Settings > System > Remote Access to show the following screen.
Figure 81 Settings > System > Remote Access (Standard Mode)
The following table describes the labels in this screen.
Table 52 Settings > System > Remote Access
LABEL
HTTPS
Server Port
Access Interface
Chapter 13 System
DESCRIPTION
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Select the interfaces through which a computer may access the NBG7815 using this
service.
NBG7815 User's Guide
140