Send Scan (E-Mail, Send File (Smb/Ftp) Or Delivery Server) Operation Error Messages - Ricoh IS200E Operating Instructions Manual

Message
Exceeded Job Delivery Data Max.
Send the current scanned data
or delete to cancel this job.
[ Delete ] [ Send ]

Send Scan (E-mail, Send File (SMB/FTP) or Delivery Server) operation error messages

Message
Updating the destination
list...
Please wait.
Updating destination list
failed. Do you want to try
again?
[Yes][No]
Possible Cause and Required Action
Scanning of the second or subsequent original
has failed.
• To send the data up to the previous page
scanned, press [Send]. After the B mark on
the screen disappears, press the { { { { Start} } } } key
to scan the remaining pages.
• If you press [Delete], scanned data is delet-
ed and the document is not sent. Try scan-
ning with such settings that make data size
smaller, or perform scanning several times
to create a number of separate files, each of
which file size is small enough for a Send
Scan operation.
Possible Cause and Required Action
• When "On" is selected for [Auto Update Des-
tination List] in [2.Send Scan Settings] on this
machine, pressing [Dest.] accesses the send-
er and destination information from the
delivery server, and updates the address
book. This function allows you access the
latest destination information. Depending
on the number of destinations and senders
registered, and the network conditions,
you may have to wait a moment while the
address book is being updated.
Address book (list of destinations and send-
ers) information could not be accessed on the
delivery server. Click [Yes] and try again. If the
same message appears, one of the following
may have occurred.
• The delivery server is not turned on, or it is
not being serviced.
• The delivery server is temporarily down
for reasons such as insufficient memory.
Troubleshooting
11
185