Ricoh IS200E Operating Instructions Manual page 90

Configuring the Scanner Settings
K K K K
Press [Settings].
The setting screen for "3. Scan
Size" appears.
L L L L
Select the Scan size.
3
• The option that is currently se-
lected is displayed first.
• "*" mark appears along with the
option currently selected.
• Use [↑ ↑ ↑ ↑ ] and [↓ ↓ ↓ ↓ ] to display the
option you want to select.
To select a scan size from preset
sizes
A While the preset scan size you
want to select is displayed,
press [OK].
This saves the setting you have
selected, and returns to the De-
fault Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
selected option, and returns
to the Default Scan Settings
menu.
82
To set a custom area
A While the option "Custom
Area Setting" is displayed,
press [Settings].
The setting screen for "Custom
Area Setting" appears.
B Use the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } } keys to
highlight the item you want to
input, and then use the num-
ber keys to input the value.
Note
❒ To correct the number you
have entered, use the { { { { 1 1 1 1 } } } }
and { { { { 0 0 0 0 } } } } keys to highlight it,
a n d t h e n
{ { { { Clear/Stop} } } } key to clear the
number.
❒ You can also use the { { { { #} } } } key
as well as the { { { { 1 1 1 1 } } } } and { { { { 0 0 0 0 } } } }
keys to move selection.
C Press [OK].
This saves the setting you have
entered, and returns to the De-
fault Scan Settings menu.
Note
❒ Pressing [Cancel] discards the
values you have entered, and
returns to the Default Scan
Settings menu.
M M M M
Press [↓ ↓ ↓ ↓ Next].
"4. Image Density" appears as the
setup item currently selected.
p r e s s t h e