Ricoh IS200E Operating Instructions Manual page 84

Configuring the Scanner Settings
❖ ❖ ❖ ❖ Resolution
This item lets you select the scan resolution. You can select from 100dpi,
200dpi, 300dpi, 400dpi, 600dpi and Custom Resolution.
Note
❒ The higher the resolution, the smaller the number of original pages that
can be scanned at a time.
❒ When you select Custom Resolution, you can specify the resolution within
the range of 75dpi through 1200dpi in 1dpi increments.
❖ ❖ ❖ ❖ Scan Size
3
This item lets you select the size of the area to be scanned. You can select from
the following options.
1
8 / x14S, 8
2
A5S, B5JIS (Japanese Industrial Standard)S, Custom Area Setting
Note
❒ When [Custom Area Setting] is selected, specify the scanning area for [Start
Positn.] and [Scanning Area].
❖ ❖ ❖ ❖ Start Positn.
Specify the position where scanning starts when [Custom Area Setting] is select-
ed in the [Scan Size] list.
Enter the offset from the reference (start) point in millimeters or inches.
Note
❒ This setting is enabled only when [Custom Area Setting] is selected in the
[Scan Size] list.
❒ You can select millimeters or inches to specify the position using [Unit of
Measure] in [2.SendScan Settings] under the Scanner Features menu. See ⇒
p.66 "Unit of Measure" for details.
❖ ❖ ❖ ❖ Scanning Area
Specify the position where scanning ends when [Custom Area Setting] is select-
ed in the [Scan Size] list.
Enter the offset from the position specified for [Start Positn.], in millimeters or
inches.
Note
❒ This setting is enabled only when [Custom Area Setting] is selected in the
[Scan Size] list.
❒ You can select millimeters or inches to specify the position using [Unit of
Measure] in [2.SendScan Settings] under the Scanner Features menu. See p.66
"Unit of Measure" for details.
❒ Make sure that you specify vertical/horizontal positions and scanning ar-
eas to be within the available scan area. The available scan area varies de-
pending on where you place the originals (on the exposure glass or on the
ADF).
76
1 1
/ x13S, 8 / x11S, 5
2 2
R, 5
1 1 1 1
/ x8 / / x8
2 2 2
S, A4S, A5R,
/
2