Ricoh IS200E Operating Instructions Manual page 73

❖ ❖ ❖ ❖ Compression (Gray Scale/Full Color)
This item determines whether to compress scan data, created under the fol-
lowing conditions.
• Scan is performed for sending the scan data using Delivery Server function
or Send Mail/Send File function.
• Scan is performed with one of the following options that is selected for
[Scan Settings] → [Scan Type] : "Black and White:Gray Scale" or "Color:Full
Color".
You can select from the following four options. JPEG compression is per-
formed when you select any of the compression options.
• Normal Compression
Intermediate compression is performed with the scan data, and intermedi-
ate file size and image quality can be obtained.
• High Compression
Higher compression is performed with the scan data so that the file size be-
comes much smaller, while the image quality gets relatively lower (in com-
parison with normal compression).
• Low Compression
Lower compression is performed with the scan data so that the image qual-
ity becomes relatively higher, while the file size gets larger (in comparison
with normal compression).
• Off
Scanned data is not compressed. Quality is not lost, but file size and mem-
ory usage increase. File size is determined by the scanning size and resolu-
tion, regardless of the status of the original.
Note
❒ The size of compressed data varies among originals even if the same qual-
ity setting is made for them. The number of original pages that can be pro-
cessed at a time also varies.
❖ ❖ ❖ ❖ Select Method
You can select a method that suits for a combination of the functions you
want to use when you perform a Send Scan operation. The following three
options are available.
• Delivery Server/TWAIN
Select this option if you want to use Delivery Server and network TWAIN.
• Send File/TWAIN
Select this option if you want to use e-mail, Send File (SMB), Send File
(FTP), and network TWAIN.
• TWAIN
Select this option if you want to use Network TWAIN only.
SendScan Settings
65
3