Lithium Batteries (Memory Back-Up) - Ricoh IS200E Operating Instructions Manual

R CAUTION:
• Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
• Unplug the Power Cord from the wall outlet before you move the equip-
ment.While moving the equipment, you should take care that the Power
Cord will not be damaged under the equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall inside
the equipment.
• For environmental reasons, do not dispose of the equipment or expended
supply waste at household waste collection points. Disposal can take place
at an authorized dealer or at appropriate collection sites.
• The inside of the machine could be very hot. Do not touch the parts with a
label indicating the "hot surface". Otherwise it could cause a personal burn.
• Our products are engineered to meet high standards of quality and function-
ality, and we recommend that you only use the expendable supplies avail-
able at an authorized dealer.

Lithium Batteries (Memory Back-up)

R WARNING:
• Do not try to replace the lithium batteries by yourself. A battery of this
type can explode if incorrectly replaced. If the lithium batteries need to
be replaced, contact an authorized dealer to request servicing.
• Never dispose of the lithium batteries by incineration. This can cause
them to rupture resulting in injury.
Note
❒ ❒ ❒ ❒ Please return used NIC boards to our authorized dealer or service
representative. Your cooperation with our recycling activities is ap-
preciated.
❒ ❒ ❒ ❒ NIC boards are equipped with a lithium battery. In the case NIC
boards are disposed of by the customer, please dispose them in ac-
cordance with national or local regulations after separating the lith-
ium batteries from the NIC board.
2