File Name For Software Image; Using The Ci Menus And Screens - Nortel 10 Installation And Reference Manual

Book.book Page 61 Thursday, April 19, 2001 4:21 PM

File name for software image

The name of the file containing the software for the BayStack 10 PSU is
bs10212.hex.

Using the CI menus and screens

You access the CI menus and screens locally through a console terminal or
remotely through a dial-up modem connection.
The menus display various configuration parameters and offer you opportunities
to change most parameters. The ability to change the parameters occurs at various
periods during the menu start-up process. If you miss the opportunity to change a
parameter, reboot the device and the menus will begin again.
When you power-up the BayStack 10 PSU, the screen shown in
Chapter 3 Managing the BayStack 10 PSU
Note: The menus scroll through the display window, rather than
appearing as discrete screens as presented in this document.
Installation and Reference for the BayStack 10 Power Supply Unit
61
Figure 22 opens.