Managing The Baystack 10 Psu - Nortel 10 Installation And Reference Manual

Book.book Page 59 Thursday, April 19, 2001 4:21 PM
Chapter 3

Managing the BayStack 10 PSU

This chapter covers the following topics:
•
•
•
•
•
This chapter describes how to configure and manage the BayStack 10 PSU
using the menu-driven console interface (CI).
Note: You can access the CI menus only during the boot-up process.
Once the BayStack 10 PSU is running, you cannot access the CI menus.
You cannot change the configuration parameters until you power-off the
BayStack 10 PSU and reboot.
"Configuring the BayStack 10
"Managing with SNMP" on page 60
"File name for software image" on page 61
"Using the CI menus and screens" on page 61
"Factory default settings" on page 72
Installation and Reference for the BayStack 10 Power Supply Unit
PSU," next
59