Transmission Modes - Kyocera KM-1650 Operation Manual

Fax Operation (Basic Use)
To switch between the Memory Transmission and
Direct Feed Transmission modes, press the Memory
Tx. key.
It is also possible to select which transmission mode will be the default setting for the initial mode.
See Setting the Default Transmission Mode ("TX Mode/Default" setting) on page 7-11.
<Transmission Modes>
In this method of transmitting with the Memory Transmission mode, the destination fax number is
dialed automatically AFTER the documents are set in the Document Processor, scanned and then
entered into memory. In this way, your documents are returned to you, ready to use, without making
you wait until the actual transmission is complete. This is an extremely convenient method to use
when transmitting multiple page documents.
This method of transmitting with the Memory Transmission mode is ideal for transmitting books and
the like that cannot be placed in the Document Processor. Documents are set one at a time directly
on the platen and, after all the documents are scanned and entered into memory, the destination fax
number is then dialed. In this case, it is necessary – after each page is scanned – to select whether
or not you want to transmit more pages. See <When the documents are set on the platen...> on
page 2-8.
In this method of transmitting with the Direct Feed Transmission mode, the destination fax number
is dialed first, and – once the connection with the other fax machine is established – the documents
that are set in the Document Processor are scanned and then transmitted. If the transmission
involves a multi-page document, the second page is scanned after the data for the first page is
transmitted.
This method of transmitting with the Direct Feed Transmission mode is ideal for transmitting books
and the like that cannot be placed in the Document Processor. Documents are set one at a time
directly on the platen, the destination fax number is then dialed first, and – once the connection with
the other fax machine is established – scanning of the document begins and the document is
transmitted. This process is carried out for each page that you want to transmit and it is necessary,
after each page is scanned, to select whether or not you want to transmit more pages. See <When
the documents are set on the platen...> on page 2-8.
2-2
Memory Transmission mode (Transmitting from the Document Processor)
Memory Transmission mode (Transmitting from the platen)
Direct Feed Transmission mode (Transmitting from the Document Processor)
Direct Feed Transmission mode (Transmitting from the platen)