Kyocera KM-1650 Operation Manual page 139

12 Use the keypad to enter a destination fax number.
You can enter the fax number using the keypad,
abbreviated numbers, one-touch keys, group dial keys,
chain dial keys or the directory. If you enter the fax
number using an abbreviated number or one-touch key
that is already designated for Subaddress-based sed Communication, you can skip steps 13
through 16.
13
If you want to designate the communication for this fax number as a Subaddress-based
Transmission, press the Sub-Address key.
> If you pressed the Sub-Address key, proceed to step 14.
> If you DID NOT press the Sub-Address key, proceed to step 17.
14 Use the keypad to enter the subaddress you want to
use for this Subaddress-based Transmission.
The subaddress can be up to 20 digits in length and
can include any combination of the numerals 0 – 9.
15 Press the Enter key.
16
If necessary, use the keypad and enter the
predetermined Subaddress Communication password.
The password can be up to 20 digits in length and can
include any combination of the numerals 0 – 9 and the
symbols "*" and "#". You do not have to enter a
Subaddress Communication password here if you agree in advance with the destination party not to
use one.
If you DO NOT need to enter a Subaddress Communication password, proceed to step 17.
17
Press the Enter key.
If the fax number you entered has already been registered for this operation or too many numbers
were entered, an error message will appear in the message display. In this case, press the Enter
key and the message display will return to a display that allows you to enter the destination fax
number again.
18
Select whether or not you want to continue entering other destination fax numbers.
> If you DO want to enter more fax numbers, return to step 12.
> If you are finished entering fax numbers, proceed to step 19.
19 Press the Enter key.
20
Enter a name for the program.
The program name can be up to 20 characters in
length. (See Entering Characters on page 2-15.)
21 Press the Enter key. The entered information will become registered under the designated program
key.
> If you want to continue registering other program keys, return to step 4, page 5-40.
> If you are finished registering program keys, press the Reset key. The operation panel will return
to the initial mode settings.
Other Features of this Fax
:
Enter Fax No.
Subaddress:
Enter Subaddress
Password:
Enter Your Password
Enter Program Name
20 Digits
20 Digits
5-43