Turning Tti Transmission On/Off ("Tti" Setting) - Kyocera KM-1650 Operation Manual

Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)

Turning TTI Transmission ON/OFF ("TTI" setting)

The TTI (Transmit Terminal Identifier) refers to information – such as the time of the transmission,
the number of pages, your station name and fax number, etc. – that is automatically sent to the
receiving party's fax and printed out on the received documents. With this fax, you can select here
whether or not that TTI information will be sent to the receiving party's fax, and – if it is – whether it
will be printed inside or outside the border of the transmitted page.
Notes
•
•
1
Press the System Menu key.
2 Press the
3
Press the Enter key.
4 Press the
5 Press the Enter key.
6
Press the
you want the TTI information to be sent and, if so, the
location where it will be printed.
If you selected Outside Page, the TTI information
will be printed outside the border of the transmitted
page.
7 Press the Enter key. The setting for TTI Transmission is complete.
8 Press the
to the initial mode settings, press the Reset key.
1-8
Prior to operation, check the message display to make sure that the touch panel is in the initial
mode for fax operation. (See What is the "Initial Mode"? on page 1-13.)
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key to select Fax Default.
key to select TTI.
key or the key to select whether or not
key or the key to select End and press the Enter key. To finish the setting and return
System Menu / Counter
Machine Default
Printer Default
Fax Default
Fax Default:
End
Line Type
TTI
TTI:
Outside Page
*
Inside Page
Do not Print
:Tone Dial
:Outside P.