Managing Information For A Scheduled Communication (Editing A Communication In Memory); Printing Out A Sample Image Of Waiting Documents - Kyocera KM-1650 Operation Manual

Managing Information for a Scheduled Communication
(Editing a Communication in Memory)
You can perform various actions relating to a scheduled communication that uses the timer. For
example, you can modify certain information relating to the communication or even cancel the
communication completely. You can also print out a sample image of the corresponding documents
as well as initiate (force-start) the communication without waiting for the actually scheduled start
time.

Printing Out a Sample Image of Waiting Documents

If you want to check the documents that correspond to a specific transmission that is in memory and
waiting for transmission, you can print out a sample page of those documents.
Notes
•
•
1
Open the cover plate to the left and press the
Information key.
2
Press the
press the Enter key.
3
Press the
press the Enter key.
If there are no communications that are using the timer
currently in memory, an error message will appear and
then the message display will return to the Edit menu.
4 Press the
number that corresponds to the desired
communication.
5 Press the Enter key. A sample image of the corresponding documents will be printed out.
Even if you print out a sample image of the documents, the transmission will be carried out on
schedule.
If you want to cancel the procedure part way through, press the Reset key. The operation panel
will return to the initial mode settings.
key or the key to select Edit and
key or the key to select Print and
key or the key to select the document
Various Functions of this Fax
Communication Information:
TX result on LCD
TX result on LCD
Edit
Edit:
Print
Immediate TX
Program/Change
Print:List
Doc # :003
:26585632
22:22 Send
P01
3-13