Kyocera KM-1650 Operation Manual page 42

Fax Operation (Basic Use)
Dialing a destination fax number
6
Use the keypad to enter the destination fax number.
The destination fax number can be up to 32 digits in
length.
If a mistake is made at any point in entering the fax number, press the < key or the > key to move
the cursor to the desired position and enter the desired number, or press the Stop/Clear key and
enter the full number once again from the beginning.
If you want to cancel the operation in progress, press the Reset key. The information entered up to
that point will be cleared and the operation panel will return to the initial mode settings.
If you stopped the operation because you made a mistake in the procedure, perform the procedure
once again from the beginning.
<Using the Pause Redial key>
Press this key to enter a 3-second pause at that point in dialing. This is useful, for example, if you
need to dial a specific number first and then wait for the connection to an outside line before the
actual destination number is dialed.
<Dialing methods>
In addition to using the keypad, the following methods of dialing are possible.
•
•
•
•
•
2-6
Dialing with a one-touch key...See page 2-18.
Dialing with abbreviated numbers...See page 2-24.
Dialing with a program key...See page 5-40.
Dialing with a group key...See page 5-35.
Redialing manually...See page 2-32.
:0
Document:
Press START key.