Using Different Fax And Telephone Numbers (D.r.d. Reception) [Available In Inch Versions Only] - Kyocera KM-1650 Operation Manual

Using Different Fax and Telephone Numbers (D.R.D. Reception)
[Available in inch versions only]
This reception mode utilizes the Distinctive Ring Pattern service available from some telephone
companies.With this service, you can use two or more telephone numbers on a single telephone
line. As each number is given a different ring pattern, the fax machine is able to differentiate
between incoming calls. If one of these numbers is designated for this fax machine, and the desired
ring pattern is designated for that number in advance, fax reception will be initiated automatically
whenever the machine detects the ring pattern distinctive to the fax.
[Reception flow]
Notes
•
•
See Selecting the Automatic Reception Mode ("Receive Mode" setting) on page 7-12, and
select the D.R.D. Reception mode.
Make sure that the Auto-Rx. indicator is it. If it is NOT
lit, open the cover plate to the left and press the
TAD/Manual-Rx. key to light that indicator.
1
When a call comes in, the telephone will ring.
If the telephone receiver is picked up while the telephone is still ringing, the fax will deal with the call
in the same manner as a standard Manual Fax Reception. See Initiating the Fax Connection
Manually (Manual Fax Reception) on page 3-22.
D.R.D. reception is only possible if you subscribe to the Distinctive Ring Pattern service
provided by your telephone company. Contact your telephone company for further information
on the Distinctive Ring Pattern service available.
Using D.R.D. Reception to receive a telephone call is only possible if a separately purchased
telephone is connected to this fax machine.
Preparation
Other Features of this Fax
5-5