System Env Temperature Threshold Yellow - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

system env temperature threshold yellow

Use the system env temperature threshold yellow global configuration command to configure the
difference between the yellow and red temperature thresholds that determines the value of yellow
threshold. Use the no form of this command to return to the default value.
Syntax Description
value
Defaults
These are the default values:
Table 2-25
Switch
Catalyst 2350
1. You cannot configure the red temperature threshold.
Command Modes
Global configuration
Command History Release
12.2(46)EY
Usage Guidelines
You cannot configure the green and red thresholds but can configure the yellow threshold. Use the
system env temperature threshold yellow value global configuration command to specify the
difference between the yellow and red thresholds and to configure the yellow threshold. For example, if
the red threshold is 66 degrees C and you want to configure the yellow threshold as 51 degrees C, set the
difference between the thresholds as 15 by using the system env temperature threshold yellow 15
command.
The internal temperature sensor in the switch measures the internal system temperature and might vary
Note
±5 degrees C.
Examples
This example sets 15 as the difference between the yellow and red thresholds:
Switch(config)# system env temperature threshold yellow 15
Switch(config)#
OL-19055-01
system env temperature threshold yellow value
no system env temperature threshold yellow value
Specify the difference between the yellow and red threshold values (in Celsius). The
range is 10 to 25. The default value is 10.
Default Values for the Temperature Thresholds
Modification
This command was introduced.
system env temperature threshold yellow
Difference
between Yellow
1
and Red Red
10°C 68°C
Catalyst 2350 Switch Command Reference
2-457