Debug Platform Tcam-Driver - Cisco WS-C2350-48TD-S Command Reference Manual

debug platform tcam-driver

debug platform tcam-driver
Use the debug platform tcam-driver privileged EXEC command to enable debugging of hardware
memory access and lookups. Use the no form of this command to disable debugging.
Syntax Description
log {asic | clear | reset | set |
start | stop}
Catalyst 2350 Switch Command Reference
B-40
debug platform tcam-driver {detail | log | read | search | shadow | trace | write}
debug platform tcam-driver log {asic | clear | reset | set | start | stop}
debug platform tcam-driver read {fram | hash | mapping | otcam | scr | tcam}
debug platform tcam-driver search
debug platform tcam-driver shadow
debug platform tcam-driver trace
debug platform tcam-driver write {fram | hash | mapping | otcam | scr | tcam}
no debug platform tcam-driver {detail | log | read | search | shadow | trace | write}
no debug platform tcam-driver log {asic | clear | reset | set | start | stop}
no debug platform tcam-driver read {fram | hash | mapping | otcam | scr | tcam}
no debug platform tcam-driver search
no debug platform tcam-driver shadow
no debug platform tcam-driver trace
no debug platform tcam-driver write {fram | hash | mapping | otcam | scr | tcam}
Display TCAM test log debug messages. The keywords have these
meanings:
• asic—Specify the ASIC to perform the operation.
• clear—Clear the TCAM log results table.
• reset—Reset the TCAM log criteria.
• set—Specify TCAM log criteria (see cli help for more information)
start—Continuously capture matching packets in TCAM log.
•
stop—Stop capturing packets.
•
Appendix B Catalyst 2350 Debug Commands
OL-19055-01