Show Etherchannel - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

show etherchannel

Use the show etherchannel user EXEC command to display EtherChannel information for a channel.
Syntax Description channel-group-number
detail
load-balance
port
port-channel
protocol
summary
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(46)EY
Usage Guidelines If you do not specify a channel-group, all channel groups are displayed.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show etherchannel 1 detail command:
Switch> show etherchannel 1 detail
Group state = L2
Ports: 2
Port-channels: 1 Max Port-channels = 16
Protocol:
Port: Gi0/1
------------
Port state
Channel group = 1
Port-channel
OL-19055-01
show etherchannel [channel-group-number {detail | load-balance | port | port-channel | protocol
| summary} [ | {begin | exclude | include} expression]
(Optional) Number of the channel group. The range is 1 to 48.
Display detailed EtherChannel information.
Display the load-balance or frame-distribution scheme among ports in the
port channel.
Display EtherChannel port information.
Display port-channel information.
Display the protocol that is being used in the EtherChannel.
Display a one-line summary per channel-group.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Maxports = 16
LACP
Ports in the group:
-------------------
= Up Mstr In-Bndl
= Po1
Mode = Active Gcchange = -
GC = - Pseudo port-channel = Po1
Catalyst 2350 Switch Command Reference
show etherchannel
2-267