Clear Eap - Cisco WS-C2350-48TD-S Command Reference Manual

clear eap

clear eap
Use the clear eap privileged EXEC command to clear Extensible Authentication Protocol (EAP) session
information for the switch or for the specified port.
Syntax Description credentials name
interface interface-id
method name
transport name
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines You can clear all counters by using the clear eap command, or you can clear only the specific
information by using the keywords.
Examples This example shows how to clear all EAP information:
Switch# clear eap
This example shows how to clear EAP-session credential information for the specified profile:
Switch# clear eap sessions credential type1
Related Commands Command
show eap
Catalyst 2350 Switch Command Reference
2-26
clear eap sessions [credentials name [interface interface-id] | interface interface-id | method
name | transport name] [credentials name | interface interface-id | transport name] ...
Clear EAP credential information for the specified profile.
Clear EAP information for the specified interface.
Clear EAP information for the specified method.
Clear EAP transport information for the specified lower level.
Modification
This command was introduced
Description
Displays EAP registration and session information for the switch or for
the specified port
Chapter 2 Catalyst 2350 Switch Cisco IOS Commands
OL-19055-01