Show Access-Lists - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

show access-lists

Use the show access-lists privileged EXEC command to display access control lists (ACLs) configured
on the switch.
Syntax Description name
number
hardware counters
ipc
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The switch supports only IP standard and extended access lists. Therefore, the allowed numbers are only
1 to 199 and 1300 to 2699.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show access-lists command:
Switch# show access-lists
Standard IP access list 1
Standard IP access list videowizard_1-1-1-1
Standard IP access list videowizard_10-10-10-10
Extended IP access list 121
OL-19055-01
show access-lists [name | number | hardware counters | ipc] [ | {begin | exclude | include}
expression]
Modification
This command was introduced.
10 permit 1.1.1.1
20 permit 2.2.2.2
30 permit any
40 permit 0.255.255.255, wildcard bits 12.0.0.0
10 permit 1.1.1.1
10 permit 10.10.10.10
10 permit ahp host 10.10.10.10 host 20.20.10.10 precedence routine
(Optional) Name of the ACL.
(Optional) ACL number. The range is 1 to 2699.
(Optional) Display global hardware ACL statistics for switched and
routed packets.
(Optional) Display Interprocess Communication (IPC) protocol
access-list configuration download information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Catalyst 2350 Switch Command Reference
show access-lists
2-221