Debug Fastethernet - Cisco WS-C2350-48TD-S Command Reference Manual

Appendix B Catalyst 2350 Debug Commands

debug fastethernet

Use the debug fastethernet privileged EXEC command to enable debugging of the Ethernet
management port. Use the no form of this command to disable debugging.
Syntax Description
af
events
packets
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(46)EY
Usage Guidelines The undebug fastethernet {af | events | packets} command is the same as the no debug fastethernet
{af | events | packets} command.
Related Commands Command
show debugging
show controllers
ethernet-controller
fastethernet
OL-19055-01
debug fastethernet {af | events | packets}
no debug fastethernet {af | events | packets}
Display Ethernet management port software-address-filter debug messages.
Display Ethernet management port event debug messages.
Display Ethernet management port packet debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays information about the Ethernet management port.
Catalyst 2350 Switch Command Reference
debug fastethernet
B-7