Exception Crashinfo - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Switch Cisco IOS Commands

exception crashinfo

Use the exception crashinfo global configuration command to configure the switch to create the
extended crashinfo file when the Cisco IOS image fails. Use the no form of this command to disable this
feature.
Syntax Description
This command has no arguments or keywords.
Defaults
The switch creates the extended crashinfo file.
Command Modes Global configuration
Command History Release
12.2(46)EY
Usage Guidelines
The basic crashinfo file includes the Cisco IOS image name and version that failed and a list of the
processor registers, and a stack trace. The extended crashinfo file includes additional information that
can help determine the cause of the switch failure.
Use the no exception crashinfo global configuration command to configure the switch to not create the
extended crashinfo file.
Examples
This example shows how to configure the switch to not create the extended crashinfo file:
Switch(config)# no exception crashinfo
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
show running-config
OL-19055-01
exception crashinfo
no exception crashinfo
Modification
This command was introduced.
Description
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comma
nd_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
Catalyst 2350 Switch Command Reference
exception crashinfo
2-65