Show Controllers Utilization - Cisco WS-C2350-48TD-S Command Reference Manual

show controllers utilization

This is an example of output from the show controllers utilization command on a specific port:
Switch> show controllers gigabitethernet0/1 utilization
Receive Bandwidth Percentage Utilization
Transmit Bandwidth Percentage Utilization
Table 2-15
Field
Receive Bandwidth Percentage
Utilization
Transmit Bandwidth
Percentage Utilization
Fabric Percentage Utilization
Related Commands Command
show controllers
ethernet-controller
Catalyst 2350 Switch Command Reference
2-250
show controllers utilization Field Descriptions
Description
Displays the received bandwidth usage of the switch, which is the
sum of the received traffic on all the ports divided by the switch
receive capacity.
Displays the transmitted bandwidth usage of the switch, which is the
sum of the transmitted traffic on all the ports divided it by the switch
transmit capacity.
Displays the average of the transmitted and received bandwidth usage
of the switch.
Description
Displays the interface internal registers.
Chapter 2 Catalyst 2350 Cisco IOS Commands
: 0
: 0
OL-19055-01