Snmp-Server Enable Traps - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands

snmp-server enable traps

Use the snmp-server enable traps global configuration command to enable the switch to send Simple
Network Management Protocol (SNMP) notifications for various traps or inform requests to the network
management system (NMS). Use the no form of this command to return to the default setting.
Syntax Description
bridge [newroot]
[topologychange]
cluster
config
config-copy
config-ctid
copy-config
entity
envmon [fan |
shutdown | status |
supply | temperature]
OL-19055-01
snmp-server enable traps [bridge [newroot] [topologychange] | cluster | config | config-copy |
config-ctid | copy-config | entity | envmon [fan | shutdown | status | supply | temperature] |
flash [insertion | removal] | fru-ctrl | rep | snmp [authentication | coldstart | linkdown |
linkup | warmstart] | storm-control trap-rate value | stpx [inconsistency]
[root-inconsistency] [loop-inconsistency] | syslog | transceiver | tty | vlan-membership |
vlancreate | vlandelete | vtp]
no snmp-server enable traps [bridge [newroot] [topologychange] | cluster | config | config-copy
| config-ctid | copy-config | entity | envmon [fan | shutdown | status | supply | temperature]
| flash [insertion | removal] | fru-ctrl | rep | snmp [authentication | coldstart | linkdown |
linkup | warmstart] | storm-control trap-rate value | stpx [inconsistency]
[root-inconsistency] [loop-inconsistency] | syslog | transceiver | tty | vlan-membership |
vlancreate | vlandelete | vtp]
(Optional) Generate STP bridge MIB traps. The keywords have these
meanings:
•
•
(Optional) Enable cluster traps.
(Optional) Enable SNMP configuration traps.
Optional) Enable SNMP configuration-copy traps
Optional) Enable SNMP configuration change tracking identification
(config-ctid) traps
(Optional) Enable SNMP copy-configuration traps.
(Optional) Enable SNMP entity traps.
Optional) Enable SNMP environmental traps. The keywords have these
meanings:
•
•
•
•
•
newroot—(Optional) Enable SNMP STP Bridge MIB new root traps.
topologychange—(Optional) Enable SNMP STP Bridge MIB topology
change traps.
fan—(Optional) Enable fan traps.
shutdown—(Optional) Enable environmental monitor shutdown traps.
status—(Optional) Enable SNMP environmental status-change traps.
supply—(Optional) Enable environmental monitor power-supply traps.
temperature—(Optional) Enable environmental monitor temperature
traps.
snmp-server enable traps
Catalyst 2350 Switch Command Reference
2-383