Show Ipv6 Mld Snooping Querier - Cisco WS-C2350-48TD-S Command Reference Manual

Chapter 2 Catalyst 2350 Cisco IOS Commands
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show ipv6 mld snooping querier command:
Switch> show ipv6 mld snooping querier
Vlan
-------------------------------------------------------------
2
This is an example of output from the show ipv6 mld snooping querier detail command:
Switch> show ipv6 mld snooping querier detail
Vlan
-------------------------------------------------------------
2
This is an example of output from the show ipv6 mld snooping querier vlan command:
Switch> show ipv6 mld snooping querier vlan 2
IP address : FE80::201:C9FF:FE40:6000
MLD version : v1
Port : Gi0/1
Max response time : 1000s
Related Commands Command
ipv6 mld snooping
ipv6 mld snooping
last-listener-query-count
ipv6 mld snooping
last-listener-query-interv
al
ipv6 mld snooping
robustness-variable
sdm prefer
ipv6 mld snooping
OL-19055-01
IP Address
FE80::201:C9FF:FE40:6000 v1
IP Address
FE80::201:C9FF:FE40:6000 v1
Description
Enables and configures IPv6 MLD snooping on the switch or on a VLAN.
Configures the maximum number of queries that the switch sends before
aging out an MLD client.
Configures the maximum response time after sending out a query that the
switch waits before deleting a port from the multicast group.
Configures the maximum number of queries that the switch sends before
aging out a multicast address when there is no response.
Configures an SDM template to optimize system resources based on how
the switch is being used.
Enables and configures IPv6 MLD snooping on the switch or on a VLAN.
MLD Version Port
Gi0/1
MLD Version Port
Gi0/1
Catalyst 2350 Switch Command Reference

show ipv6 mld snooping querier

2-309