Device Management; Device Management Overview - 3Com S7906E Configuration Manual

1

Device Management

The S7900E Series Ethernet Switches are distributed devices supporting Intelligent Resilient
Framework (IRF). Two S7900E series can be connected together to form a distributed IRF device. If an
S7900E series is not in any IRF, it operates as a distributed device; if the S7900E series is in an IRF, it
operates as a distributed IRF device. For introduction of IRF, refer to IRF Configuration in the System
Volume.
When configuring device management, go to these sections for information you are interested in:

Device Management Overview

Device Management Configuration Task List
Configuring the Exception Handling Method
Rebooting a Device
Configuring the Scheduled Automatic Execution Function
Upgrading Device Software
Configuring Temperature Alarm Thresholds for a board
Clearing the 16-bit Interface Indexes Not Used in the Current System
Configuring the System Load Sharing Function
Enabling Active/Standby Mode for Service Ports on SRPUs
Configuring the Traffic Forwarding Mode of SRPUs
Configuring the Working Mode of LPUs
Enabling the Port Down Function Globally
Enabling Expansion Memory Data Recovery Function on a board
Identifying and Diagnosing Pluggable Transceivers
Displaying and Maintaining Device Management Configuration
Device Management Configuration Examples
Device Management Overview
Through the device management function, you can view the current working state of a device, configure
running parameters, and perform daily device maintenance and management.
1-1