Level Switching Authentication For Telnet Users By An Hwtacacs Server - 3Com S7906E Configuration Manual

S7900e family release 6600 series

Hide thumbs Also See for S7906E:

Command reference manual (2327 pages)

Getting started manual (155 pages)

Datasheet (8 pages)

Table of Contents

[Switch-ui-vty0-4] protocol inbound ssh

[Switch-ui-vty0-4] quit

# Create RADIUS scheme rad.

[Switch] radius scheme rad

# Specify the primary authentication server.

[Switch-radius-rad] primary authentication 10.1.1.1 1812

# Specify the primary accounting server.

[Switch-radius-rad] primary accounting 10.1.1.1 1813

# Set the shared key for authentication packets to expert.

[Switch-radius-rad] key authentication expert

# Set the shared key for accounting packets to expert.

[Switch-radius-rad] key accounting expert

# Specify that a username sent to the RADIUS server carries the domain name.

[Switch-radius-rad] user-name-format with-domain

# Specify the service type for the RADIUS server, which must be extended when the RADIUS server

[Switch-radius-rad] server-type extended

[Switch-radius-rad] quit

# Configure the AAA methods for the domain.

[Switch] domain bbb

[Switch-isp-bbb] authentication login radius-scheme rad

[Switch-isp-bbb] authorization login radius-scheme rad

[Switch-isp-bbb] accounting login radius-scheme rad

[Switch-isp-bbb] quit

When using SSH to log in, a user enters a username in the form userid@bbb for authentication using

Verify the configuration

After the above configuration, the SSH user should be able to use the configured account to access the

user interface of the switch. The commands that the user can access depend on the settings for EXEC

users on the iMC server.