Http Test Configuration Example - 3Com S7906E Configuration Manual

Square-Sum of round trip time: 29929
Last succeeded probe time: 2007-11-22 10:07:28.6
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of FTP tests.
[DeviceA] display nqa history admin test
NQA entry(admin admin, tag test) history record(s):
Index
1

HTTP Test Configuration Example

Network requirements
Use the HTTP function to test the connection with a specified HTTP server and the time required to
obtain data from the HTTP server.
Figure 1-7 Network diagram for the HTTP tests
Configuration procedure
# Create an HTTP test group and configure related test parameters.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type http
[DeviceA-nqa-admin-test-http] destination ip 10.2.2.2
[DeviceA-nqa-admin-test-http] operation get
[DeviceA-nqa-admin-test-http] url /index.htm
[DeviceA-nqa-admin-test-http] http-version v1.0
# Enable the saving of history records.
[DeviceA-nqa-admin-test-http] history-record enable
[DeviceA-nqa-admin-test-http] quit
# Enable HTTP test.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Disable HTTP test after the test begins for a period of time.
[DeviceA] undo nqa schedule admin test
Response Status
173 Succeeded
Time
2007-11-22 10:07:28.6
1-29