Portal Configuration Examples; Configuring Direct Portal Authentication - 3Com S7906E Configuration Manual

To do...
Display portal server statistics
on a specified interface or all
interfaces
Display TCP spoofing statistics
Display information about
portal users on a specified
interface or all interfaces
Clear portal connection
statistics on a specified
interface or all interfaces
Clear portal server statistics on
a specified interface or all
interfaces
Clear TCP spoofing statistics

Portal Configuration Examples

Configuring Direct Portal Authentication

Network requirements
The host is directly connected to the switch and the switch is configured for direct authentication.
The host is assigned with a public network IP address manually or automatically by a DHCP server.
Before portal authentication, users using the host can access only the portal server. After passing
portal authentication, they can access unrestricted Internet resources.
A RADIUS server serves as the authentication/accounting server.
Figure 1-4 Configure direct portal authentication
Vlan-int100
2.2.2.1/24
Host
2.2.2.2/24
Gateway：2.2.2.1/24
Configuration procedure
Use the command...
display portal
statistics { all | interface
interface-type
interface-number }
display portal
statistics
display portal user { all |
interface
interface-number }
reset portal
statistics {all
interface-type
interface-number }
reset portal server statistics
{ all | interface interface-type
interface-number }
reset portal
statistics
Vlan-int2
192.168.0.100/24
Switch
1-13
server
Available in any view
tcp-cheat
Available in any view
interface-type Available in any view
connection
| interface
Available in user view
Available in user view
tcp-cheat
Available in user view
Portal server
192.168.0.111/24
RADIUS server
192.168.0.112/24
Remarks