3Com S7906E Configuration Manual page 2416

seqNO = <10> srcIP = <1.1.1.2> op = <get> node = <sysName(1.3.6.1.2.1.1.5.0)> value=<>
The following log information is displayed on the terminal when the NMS performs the Set
operation to the agent.
%Jan 1 02:59:42:576 2006 Sysname SNMP/6/SET:
seqNO = <11> srcIP = <1.1.1.2> op = <set> errorIndex = <0> errorStatus =<noError> node =
<sysName(1.3.6.1.2.1.1.5.0)> value = <Sysname>
Table 1-1 Description on the output field of SNMP log
Field
Jan 1 02:49:40:566 2006
seqNO
srcIP
op
node
erroIndex
errorstatus
value
The system information of the information center can be output to the terminal or to the log buffer. In this
example, SNMP log is output to the terminal. For configuration of SNMP log output to other destinations,
see Information Center Configuration in the System Volume.
Description
The time when the SNMP log is generated
Serial number of the SNMP log (The system numbers
the recorded SNMP logs automatically; the serial
number starts from 0)
IP address of the NMS
SNMP operation type (GET or SET)
Node name of the SNMP operations and OID of the
instance
Error index, with 0 meaning no error
Error status, with noError meaning no error
Value set when the SET operation is performed (This
field is null, meaning the value obtained with the GET
operation is not logged.)
When the value is a string of characters and the string
contains characters not in the range of ASCII 0 to 127 or
invisible characters, the string is displayed in
hexadecimal. For example, value = <81-43>[hex]
1-13