Private Alarm Group Configuration Example - 3Com S7906E Configuration Manual

S7900e family release 6600 series
Hide thumbs Also See for S7906E:
Table of Contents

Advertisement

<Sysname> display rmon statistics GigabitEthernet 2/0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet2/0/1<ifIndex.3>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64
: 7
256-511: 0
After completing the configuration, you may query alarm events on the NMS. On the monitored device,
alarm event messages are displayed when events occur. The following is a sample output:
[Sysname]
#Aug 27 16:31:34:12 2005 Sysname RMON/2/ALARMFALL:Trap 1.3.6.1.2.1.16.0.2 Alarm table 1
monitors 1.3.6.1.2.1.16.1.1.1.4.1 with sample type 2,has sampled alarm value 0 less than(or
=) 50.

Private Alarm Group Configuration Example

Network requirements
As shown in
Figure
packets. When the utilization rate is higher than 80%, the system logs the event locally and sends a trap
to the NMS; when the utilization rate is lower than 5%, the system only logs the event locally.
Figure 1-4 Network diagram for RMON
Configuration procedure
# Configure the SNMP parameters. (Note that, parameter values configured on the agent must be the
same with the following configured on the NMS: suppose SNMPv3 is enabled on the NMS, the user
name is v3user, the IP address of the NMS is 1.1.1.2, authentication protocol is MD5, authorization
password is authkey, the privacy protocol is DES56, and the privacy password is prikey.)
<Sysname> system-view
[Sysname] snmp-agent
[Sysname] snmp-agent sys-info version v3
[Sysname] snmp-agent group v3 v3group
[Sysname] snmp-agent usm-user v3 v3user v3group authentication-mode md5 authkey privacy-mode
des56 prikey
: 57329
: 53
: 0
: 0
,
65-127
: 413
,
512-1023: 0
1-4, monitor the utilization rate of interface GigabitEthernet 2/0/1 when it is receiving
, etherStatsPkts
, etherStatsMulticastPkts : 353
, etherStatsOversizePkts
, etherStatsJabbers
, etherStatsCollisions
,
128-255
: 35
,
1024-1518: 0
1-11
: 455
: 0
: 0
: 0

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

S7910eS7906e-vS7903eS7903e-sS7902e

Table of Contents