Console Port Login Configuration With Authentication Mode Being Scheme - 3Com S7906E Configuration Manual

# Set the maximum number of commands the history command buffer can store to 20.
[Sysname-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[Sysname-ui-aux0] idle-timeout 6
After the above configuration, to ensure a successful login, the console user needs to change the
corresponding configuration of the terminal emulation program running on the PC, to make the
configuration consistent with that on the switch. Refer to
for details.
Console Port Login Configuration with Authentication Mode Being
Scheme
Configuration Procedure
Follow these steps to perform Console port login configuration (with authentication mode being
scheme):
To do...
Enter system view
Enter AUX user interface
view
Configure to authenticate
users locally or remotely
Quit to system view
Use the command...
system-view
user-interface aux first-number
[ last-number ]
authentication-mode scheme
quit
2-9
Setting Up the Connection to the Console Port
Remarks
—
—
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the Console port are not
authenticated
—