Seven Output Destinations And Ten Channels Of System Information - 3Com S7906E Configuration Manual

Table 1-1 Severity description
Severity
Emergency
Alert
Critical
Error
Warning
Notice
Informational
Debug

Seven Output Destinations and Ten Channels of System Information

The system supports seven information output destinations, including the console, monitor terminal
(monitor), log buffer, log host, trap buffer, SNMP module and log file.
The system supports ten channels. The eight channels 0 through 5, and channel 9 are configured with
channel names, output rules, and are associated with output destinations by default. The channel
names, output rules and the associations between the channels and output destinations can be
changed through commands. Besides, you can configure channels 6,7 and 8 without changing the
default configuration of the seven channels.
Table 1-2 Information channels and output destinations
Information
channel
number
0
1
2
3
4
5
6
7
Severity value
0
1
2
3
4
5
6
7
Default
Default output destination
channel name
console Console
monitor Monitor terminal
loghost Log host
trapbuffer Trap buffer
logbuffer Log buffer
snmpagent SNMP module
channel6 Not specified
channel7 Not specified
Description
The system is unusable.
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal but significant condition
Informational messages
Debug-level messages
Receives log, trap and debugging
information.
Receives log, trap and debugging
information, facilitating remote
maintenance.
Receives log, trap and debugging
information and information will
be stored in files for future
retrieval.
Receives trap information, a
buffer inside the router for
recording information.
Receives log and debugging
information, a buffer inside the
router for recording information.
Receives trap information.
Receives log, trap, and
debugging information.
Receives log, trap, and
debugging information.
1-3
Description