Displaying And Maintaining Snmp; Snmpv1/Snmpv2C Configuration Example - 3Com S7906E Configuration Manual

Displaying and Maintaining SNMP

To do...
Display SNMP agent system
information, including the
contact, location, and version of
the SNMP
Display SNMP agent statistics
Display the SNMP agent
engine ID
Display SNMP agent group
information
Display basic information of the
trap queue
Display the modules that can
send traps and whether their
trap sending is enabled or not
Display SNMPv3 agent user
information
Display SNMPv1 or v2c agent
community information
Display MIB view information
for an SNMP agent

SNMPv1/SNMPv2c Configuration Example

Network requirements
As shown in
The IP address of the NMS is 1.1.1.2/24.
The IP address of the agent is 1.1.1.1/24.
The NMS monitors and manages the agent using SNMPv1 or SNMPv2c. The agent reports errors
or faults to the NMS.
Figure 1-3 Network diagram for SNMPv1/v2c
Configuration procedure
1) Configuring the SNMP agent
Use the command...
display snmp-agent sys-info
[ contact | location | version ]*
display snmp-agent
statistics
display snmp-agent
local-engineid
display snmp-agent group
[ group-name ]
display snmp-agent trap
queue
display snmp-agent trap-list
display snmp-agent
usm-user [ engineid engineid |
username user-name | group
group-name ] *
display snmp-agent
community [ read | write ]
display snmp-agent
mib-view [ exclude | include |
viewname view-name ]
Figure 1-3, the NMS connects to the agent through an Ethernet.
Available in any view
1-9
Remarks