Switching The Display Of The Measured Value - Omron ZS-HL User Manual

Section4

Switching the Display of the Measured Value

Switching the Display of the Measured Value
In RUN mode, You can switch the display for main/sub-display during the operation. You
can check the threshold value and resolution while displaying the measured value
according to the application.
In this mode, measured values are displayed on the main display, and threshold values
and other information are displayed on the sub-display.
When [TERMINAL BLOCK]-[OUTPUT] is set (*3)
• When [JUDGE] is set
MAIN: MEASURE
JUDGE
For Multi-Task mode (*2)
*1)
TKx on the LCD screen indicates that the measured value of the current TASKx is displayed in
the main display. Switch TASK that is displayed in the main display by using the function keys.
*2) It is displayed only in Multi-Task mode. Up to two measured values for tasks can be displayed
in parallel in the main display and sub-display.
ZS-HL
4-2
User's Manual
TEACH
FUN RUN
MAIN: MEASURE
SUB: THRESH
• When [MEASUREMENT] is set
MAIN: MEASURE
1 P 2 E 3 E 4 H SUB: TERMINAL
(*4)
MAIN: MEASURE TK1
SUB: TASK4 MEASURE
LD ON ZERO ENABLE
Main Display
H
P
Sub-display
L
LCD screen
ESC
MENU
1 2
Control keys
3 4
TEACH
SET
H L FUN RUN
MAIN: MEASURE
SUB: VORTAGE
TK1
MAIN: MEASURE
SUB: TASK3 MEASURE
TK1