Smartmonitor Zs; Operating Environment - Omron ZS-HL User Manual

Section2

SmartMonitor ZS

SmartMonitor ZS
ZS-HL is provided with the SmartMonitor ZS software utility. This utility allows you to set up
sensing functions and monitor the waveforms of measurement results on a personal computer.
● Monitoring the measurement state
Checks the measured value of the gang-mounted
controller in the list.
● Setting support for functions
Sets the sensing conditions in detail while checking
the receiving status of the Sensor Head (sensitivity).
If you use SmartMonitor ZS Professional, which is sold separately, you can also do the following:
• Display multiple CH waveforms using multiple controllers.
• Perform logging for the measured value.

Operating Environment

The following describes the operating environment for SmartMonitor ZS. Please check them.
Item
OS
CPU
Memory
Display
• Windows is a trademark or registered trademark of Microsoft Corporation.
• Celeron is a trademark or registered trademark of Intel Corporation or its subsidiaries.
ZS-HL
2-14
User's Manual
USB cable
Receiving
status
Line bright
Condition
Windows 98/2000/XP
Celeron 500MHz or faster
At least 128 MB
1024 × 768 dots HighColor
SmartMonitor ZS
(accessory for ZS-HLDC_1A)
Displays the change of the time series for the mea-
sured value in a graph.
Displays and sets the settings for the controller
in the list.