Section2
About Installation and Connection/Sensor Head
About Installation and Connection
■ Checking the installation environment
Read "Important Points on Safety" at the beginning of this manual, and check the
installation environment.
■ Checking the installation site
Read "Notes on Use" at the beginning of this manual, and check the installation site.
■ About the power supply
Before installing and connecting the Sensor Controller, be sure to turn it OFF.
Also read "Important Points on Safety" and "Notes on Use" at the beginning of this
manual, and check the power supply and wiring.
Sensor Head
Never look into the laser beam. Doing so continuously will result in
visual impairment.
Never look into the laser beam.
Do not disassemble the product. Doing so may cause the laser beam
to leak, resulting in the danger of visual impairment. Do not disas-
semble the product.
ZS-HL
2-2
User's Manual