Settings for Linear Output
This section describes the settings required for linear output of the current measurement
result.
Assignment of Linear Output
Sets the output for the linear output line. Depending on the selected task mode, the setting
value differs.
FUN mode-[I/OSET]-[ANALOG]-[OUT]
• For Single-Task mode
Setting
ON
OFF
• For Multi-Task mode
Setting
TASK1
TASK2
TASK3
TASK4
NONE
Linearly outputs the measured value from the controller. (default value)
Does not output linearly.
The measured value of the task selected here is linear-output from the controller.
(default value: TASK1)
Does not output linearly.
Settings for Linear Output
Description
Description
Section6
ZS-HL
6-3
User's Manual