Omron ZS-HL User Manual page 38

Section2
Sensor Head
■ Extension Cable
There are three ways to extend a cable.
• Entire length within 12 m
Cable for the Sensor Head
• Entire length within 22 m (Connect extension cables)
Cable for the Sensor Head
: 0.5 m, 2 m
• Extended for a long distance (Use a repeater)
Cable for the Sensor Head
: 0.5 m, 2 m
• Only the ZS-XC_B(R) cable allows this extended connected. Note, however, that the connection
• The cable may break at locations where it is made to bend. So, use a robot cable type extension
• There are restrictions on the Sensor Head that can connect to ZS-XC_ _CR, ZS-XC02D, and ZS-
ZS-HL
2-6
User's Manual
Extension cable
: 0.5 m, 2 m ZS-XC_A_: 1 m, 4 m, 8 m
ZS-XC_B(R): 5 m, 10 m
Extension cable
ZS-XC_B(R): 5 m, 10 m
Digital equalizer
ZS-XEQ
with the ZS-XC_A cannot be extended.
cable (ZS-XC5BR, ZS-XC_ _CR).
XEQ. For details, contact your OMRON representative.
ZS-XC_B(R): 5 m, 10 m
Digital equalizer
ZS-XEQ
Extension cable
ZS-XC15CR: 15 m
ZS-XC25CR: 25 m
Extension cable
Digital equalizer
connection cable
ZS-XC02D: 0.2 m